...selection eng-HD-E1 1589cc manual over heating- have checked thermostat water pump not that old radiator ok top radiator hose hot bottom hose cold. does this model require bleeding of the cooling ...
...presure on your engine is pressing your block or head together keeping it from leaking but at idel it starts to leek what is the color of you oil if it is brown or milky that most likely the problem. ...
air in the radiator HOW TO RELESE PRESURE OR AIR OUT OF THE RADIATOR SYSTEM Remove the rad cap, start engine, rev at 2,000 rpm for 1 minute, replace rad cap while engine still running
air presure in radiator loosen the radiator car on the thermostat housing and run the car witth the heat on high
...presure test on the radiator cap. The radiator cooling fan should be coming on regardless of heat up so listen for it to come on. If it isn't coming on, you need to unplug the coolant sensor by the ...
...air pressure, You can remove radiator cap. to release presure but far as i know there is no air presure in the engine . Good luck to ya. I have been wrong befor. Please let me know if there is
...cooling system operates. If all of these are good and you still are getting high presure in your radiator, you could possibly have a blown head gasket causing compression to enter the cooling
...Radiator cap presure tested . also this could be a air lock in the engine if the radiator is new with the engine running and the heater on hot observe the fluid level in the radiator with the cap off ...
...presure in coolent header tank. New water pump fitted. happens with or without themerstat. heater not getting hot, could there be a blockage in the system? pressure build up is probably caused by a ...
...Radiator pump presure tester" Let the engine cold down and hook it to radiator filler neck make sure it's good tight then pum untill you feel some presure, then it time to check for leak. You'll be ...
147 questions posted
Usually answered in minutes!
333 Questions
93 Questions
14 Questions
2 Questions
4 Questions
