1999 Daewoo Nubira "valve timing" Questions

...i strongly suggest inspecting for bent valves. Daewoo is notorious for bending all valves and breaking valve guides in the cylinder head when the timing belt breaks. The broken belt is also

timing off and be pressing a piston against a valve. If you are at this point, then you need to remove cam belt and unbolt cam shafts to release all tension on any of the valves. return the number one

...busted a cam shaft. if the Timing belt was broken and it happened while the motor was running there is a 90% probability that you bent every valve in the head assembly from contact with the

...the timing marks and firing order for a 1998 daewoo nubira cdx 2.0 wagon Timing belt broke had bend valves and guides .replaced all relative parts.new valves ,timing belt therefore this request for ...

...timing of the engine on my Daewoo Nubira( 1997). Beacuse we hard to remove the cylinder head when doing that, we also discoverd a 'finished' gasket and replaced it with a new one. However, when the ...

timing belt broke how do i set the timing marks Daewoo engines bend valves when the belt fails ,confirm this with a cylinder leakage test. Here is a picture of the timing for a 16 valve engine

...timing belt set right, do a cylinder compression test, if your belt when bad on you , you could have bent valve, this engine is an interference engine, it will bent valve's do a compression test on ...

...timing belt,he also stated because I was driving it could have valve damage too. How likely is it that the valves will need to be repaired too, and why? hes right if it has an overhead cam motor The ...

...those to align the cam gear timing marks to. If no marks on the valve cover then point the cam gear timing marks at each other as per the pictures then align the crankshaft timing marks as

timing marks, possible you may have it 180 out? Lots of techs get #1 piston up but dont look to see if the intake and exhaust valves are closed.... if the valves are not both closed you are not up on