...set compared to the original wear marks on the pulleys and gears, centered). I also manually turned the engine and the belt started "walking" off the gears and pulleys but never got worse than about ...
set, payen head gasket hooked up everything and.... Nothing.... It has spark at the sparkplugs(tested all 4),has fuel, timing is lined up with its marks. It turns,sparks but intermittent compression..
Question about Cars & Trucks
...set timing on avwcabrio with 2.0 need help couldn't find a chilton book to cover this year and make Automatic/manual?? Did a 1.8 recently year 2000I think manual shift.. Can shaft timing is ...
...set the timing on a sebring 2002 engine setting the timing marks right What, you want someone to write a 5 page personal manual for you on how to do it? Do you not have Google in your neighborhood? ...
...timing and the marks try to set it but doesnt want to start now i want to confirm timing marks because only the waterpump was replaced. get a Haynes repair manual it has your timing marks you ...
Question about Buick Cars & Trucks
...set? Check library for a repair manual. Usually the timing marks are marked on the front balancer pully mark the designated mark with something like whiteout so you can see it properly with a timing ...
...set the timing on your 1991 Nissan truck, follow these steps: Locate the timing marks on the engine. They are usually located on the front of the engine, near the crankshaft pulley. Remove the timing ...
...and enabled when you are done. The valves should be set first then set the timing. A Haynes manual available at your local auto parts store should contain pictures and information to help you do
...Manual TransmissionConfirm that engine is set to TDC for cyl #1 by checking that the timing mark on the flywheel lines up with notch at inspection hole on manual trans. Automatic TransmissionConfirm ...
...somewhere under the steering wheel. Check the manual for the proper circuit to ground. With the engine warm and the circuit grounded. Set the proper timing. Un-ground the circuit and you are
733 questions posted
Usually answered in minutes!
540 Questions
410 Questions
304 Questions
0 Questions
