1996 Jeep Cherokee Sport "camshaft position sensor 96" Questions

Ad

...camshaft position sensor. The computer uses the cam position sensor to know when to pulse the injectors. The crank position sensor provides the information for spark timing. If the sensor fails, the ...

Ad

camshaft position sensor was replaced 2 years ago with a boneyard part.my lower 02 sensor is gone, and the only codes im pulling up are p0138, p0141, and p0351. i am still troubleshooting, any help or

Ad

...there should be no continuity there. Had the same problem on a 96 Laredo. Had to change the CAMSHAFT position sensor. It is a flat plastic part with an electrical connetor found in the

Camshaft Position Sensor (CMP) signals with a lab scope. 2. Check the wiring and connections at the CKP and CMP sensor. Potential Causes:Camshaft Position Sensor (CMP) Crankshaft Position Sensor (CKP)

Camshaft position sensor how do I change this not the crankshaft shaft position sensor cam 98 Tahoe 4x4 5.7 I have a 96 mazda van and although I was getting camshaft position errors, it does not even ...

camshaft position sensor located on a 1996 7.4 litter rv engine I looked up 96 chevy k2500 7.4L engine. It says the camshaft position sensor is in the distributor, three wire connector. Not sure about

...Camshaft Position Sensor Circuit Malfunction This indicates that a problem was detected in the camshaft position sensor circuit. Since it says circuit, that means the problem could lie in any part of ...

Question about Jeep Cherokee

1 Answer

...CAMSHAFT TO CRANKSHAFT POSITION CORRELATION MALFUNCTION CONDITIONS, POSSIBLE CAUSES , CMP SENSOR LOOSE CAUSING A VARIATION IN THE SENSOR SIGNAL, EXCESSIVE FREE PLAY IN THE TIMING CHAIN AND GEAR ...

camshaft position sensor is faulty, you will need to replace the sensor locate behind cam gear. I would pick up Haynes auto repair book for 20 bucks, it will give you instruction on camshaft tear down

position sensor for a 98 model engine? I got one for a 96 model but it didn't change anything. The scanner that I have reads that the camshaft sensor is the problem. I don't think that these two years

Not finding what you are looking for?
Cars & Trucks Logo

337 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Jeep Cherokee
1998 Jeep Cherokee

1,380 Questions

1999 Jeep Cherokee
1999 Jeep Cherokee

1,162 Questions

1995 Jeep Cherokee
1995 Jeep Cherokee

698 Questions

2000 Jeep Cherokee
2000 Jeep Cherokee

672 Questions

2001 Jeep Cherokee
2001 Jeep Cherokee

659 Questions

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...