...bolts back in and tighten them tight, then put your tire back on. Pump the brake pedal till it up and hard again, then do the other side the same way. No problem. Happy to be of service my
brake pedal area. On tapping pedal it would stop. Now hissing very loud and does not stop when tapping pedal. Please can you advise Sue Bayly Hissing or scratching sound is usually related to consumed
...brake w/eng running I can get a firm pedal, but pushing the pedal firmly I can make it go to the floor. I'm thinking master cyl. It did have good pedal before the pad replacement. Thanks bleed brakes ...
...brake pedal still goes all way to floor. what am i missing It can be issue with master cylinder or the problem is there is still some air there in the system that has to be bleed. Or else the parts ...
brake pedal firmly several times while the car is stationary so that the brake pads adjust to their normal operating positions!!! Check brake fluid level and top up if neccessary!!! start car,trany in
...brake caliper to travel further out and will cause further pedal travel the following link shows how to replace brakes most vehicles the procedure is the same also in link is how to bleed brakes ...
Question about Cars & Trucks
...Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/pulsating-brake-pedal.html --------- Spongy brake pedal? http://repairhelpcenter.blogspot.com/2011/12/spongy-brake-pedal.html ---------- Hard ...
...brake pedal depressed several times then it works fine CAR BRAKE PROBLEMS It can be issue with master cylinder or the problem is there is still some air there in the system that has to be bleed. Or ...
...brake pedal goes to floor. no brakes Changed front brake pads on my 2000 Jeep Grand Cherokee Limited. Had to remove brake line ''block'' to caliper to remove pad holders in order to install new pads. ...
17 questions posted
Usually answered in minutes!
20 Questions
11 Questions
8 Questions
8 Questions
7 Questions