1999 Saab 9-5 "install throttle pedal position sensor" Questions

pedal arm with throttle cable clockwise.Make sure that the throttle arm does not follow the movement of the pedal arm I recently had the same problem, my 2002 9-5 Aero would die every time I came to a

...Hi, am having a similar problem with my nissan tiida... they have tested the accelerator pedal and the throttle and there both okay! Could it be the

Pedal Position (APP) Sensor A/B (Throttle Position Sensor D/E) Incorrect Voltage Correlation. Accelerator pedal position (APP) sensor A and accelerator pedal position (APP) sensor B are potentiometers

...throttle cannot fully close. If the cable is OK, it is probably the accelerator position sensor under the pedal. There are procedures for testing the unit that I will paste below if you care to try ...

...throttle is good, then test the accelerator position sensor per the procedure below. Please let me know if you have any questions, and thanks for using FixYa. OperationThe APP sensor is an input to ...

...throttle positioning sensor before you remove it if you are planning on replacing this sensor. because if you do not install the new sensor in the same degree that the old one was in, you will throw ...

...install and hasn't happened since.   this is actually not a solution but an addition to the question...my 2004 dodge ram 1500 5.7l hemi is having the same problem, however no one seems ...

...the light but will stay in memory until the computer is reset. For help to change throttle body sensor check out you tube :How To Install Replace Throttle Position Sensor Chevy Silverado GMC

...pedal for throttle control; however, the vehicle acceleration is limited. • Limited throttle mode--The ECM will continue to use the accelerator pedal for throttle control; however, the maximum ...

...Install the throttle body. Connect the TP sensor connector and the IAC valve connector. Connect the coolant hoses to the throttle body. Connect the vacuum hoses to the throttle body. Connect the ...