1995 Land Rover Discovery "remove gear box" Questions

Ad

Question about Land Rover Discovery

2 Answers

gear eg not in park so wont let you remove the key and leave the car out of gear in case it rolls away .Dan Happens to me sometimes as well - If you leave the car in park, turn the key all the way on

Ad

Question about Land Rover Discovery

3 Answers

gear box i have a land rover discovery it will drive in 4x4 but won`t drive in normal gears what do you think could be the trouble Hi Steve, without knowing a bit more about your disco, ie, age, 200 ...

Ad

Question about Land Rover Discovery

1 Answer

gear box and still the same Hello looks like your looking at a toque converter this is in the bell housing located between the motor and transmission this is what converts the torque once these let go

...assembly, and requires removal of the gearbox from the vehicle along with the transfer box. You then remove the extension housing (requiring new bolts) and then replace the park lock gear and

Question about Land Rover Discovery

3 Answers

...box is faulty. This tells the electronic management system what gear you are in and sometimes 2 gear positions are indicated at the same time (I think). The ecu goes into limp mode as you have ...

Question about Cars & Trucks

1 Answer

...gear box is on in the frame you will also need to remove the neutral switch wire with a 13 mm wrench and slotted screw driver to keep the adjustment screw from moving. You can refer to the complete ...

Question about Land Rover Discovery

2 Answers

s if you get them make sure you have your gear box in 5th gear before you attempt to remove them ok gives you more room in that gear to remove old washers and you should see the diffrance then ok 

Question about Land Rover Discovery

1 Answer

...remove the p/s lines to the gear box, take the nut of the pitman arm and seperate the center link of the pitman arm, remove the front shield, remove three bolts from the side of the frame holding the ...

Question about Land Rover Discovery

1 Answer

remove gear shift assembly how do I replace the gear shift assembly There will be 4 bolts on top of the gear box that fix the gear selector turret in place . Remove any trim and rubber boots to get to

...Remove the gear lever at the tower bolts on the gear box. Drain the gear box or be prepaired for the gear oil to run out the end of the transmission when you pull the box. . Place a bottle jack under ...

Not finding what you are looking for?
1995 Land Rover Discovery Logo

252 questions posted

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...