1995 Land Rover Discovery "fitting heater matrix" Questions

how to fit a heater matrix on a landrover discovery 2.5 tdi take the dash out to gain access

heater matrix? hi, i need to fit a heater matrix on my ka and havent a clue where to start! is it a really big job? how would i go about it? kind regards sam. i would not bother just sell it and get a

heater matrix on a fiat doblo van myself or will i have to take it to the garage . is it difficult? most heator matrix replacements involve removing the dashboard did you don it or take it to a garage

heater matrix. You can bypass the matrix by pulling the water pipes from either side and joining them with a piece of copper pipe to stop the leak and make the car useable for the time being. You will

...fitting 'push on' fit and are normally easy to replace. Pull the old one off and push the new one on. The Heater matrix is a small radiator mounted under the dashboard and supplies the heat for the ...

...heater matrix as mine is leaking just a temporary fix Hi font the hoses going to the matrix through the bulk head and fit a steel tube of the same size with two clips this will do the job until you ...

...heater matrix.With vehicle in cold state, disconnect heater matrix feed and return pipes from within engin bay. Turn the vehicle's internal temperature setting to hot. If the vehicle is fitted ...

...Heater matrix removal used to be generally much simpler before vehicles were manufactured in modular form. These modern times find the heater unit fitted into the body before almost anything else and ...

...what could be causing this action? see above probably a heater matrix leak or the matrix for the air con either a split pipe or coroded matrix or a crack in on of the pipe fittings hope this helps ...

...to the heater matrix is jammed shut, the actuator has burnt out or a blocked heater matrix. Trace the smaller diameter pipe from the thermostat housing and see if you can manually operate the