...diesel uses a different procedure. You'll need a tool to hold the camshaft pulley parallel to the top of the cylinder head. The timing mark to set TDC for piston #1 is located on top of bell housing. ...
Question about Cars & Trucks
injection pump the car is a 1991 Jetta turbo echo Diesel 4 door I bought these tools years back and can not find the instructions on how to use the tools to adjust the injection pump. GOOGLE it , look
diesel engines with high pressure injection pumps is "yes, you require a lock tool" to hold the injection pump pulley. As I think these are a common rail set-up, this requirement may not be necessary.
...injection, and works more like gas car than diesel. but says> The diesel-fuel is delivered either by a mechanical injection pump or a common rail fuel injection installation. my guess is common ...
...when it gets hot, Best to replace entire injection pump for warranty purposes> repair should be made by qualified diesel mechanic as the **** timing has to be set with scan tool after ...
...many mm BTDC or AFTDC to time it correctly, then there is a process to do it. If you can't it would be best to take it to your local diesel fitter injection specialist to do it for you, hope this ...
...Diesel ? You must drain and refill the fuel tank. Some of these systems use optical sesnors in the injection pump and can be damaged not to mention the damage to the pistons and valves. Great trucks. ...
...diesel type it doesn't have an injection pump but does have a high pressure diesel pump that will not need timing to the engine. If the pump of either type is failing, once removed they should be ...
...diesel ,but with these engines their is no keyway on the timing belt sprockets and its not unusual for the sprocket to move if a new timing belt has been fitted ,Now their is a special tool for ...
111 questions posted
Usually answered in minutes!
156 Questions
117 Questions
111 Questions
58 Questions
37 Questions