2000 Renault Sportwagon "switch steering" Questions

Ad

Question about Renault Sportwagon

1 Answer

...1999, power steering is very stiff when car is cold , when i say stiff ( i mean as if the engine is switched off ) but eases off when it gets warmer .I need to know what grade of power steering fluid ...

Ad

Question about Renault Sportwagon

1 Answer

...switch from the steering wheel. Remove the steering wheel shroud retaining screws from the back of the steering wheel. Remove the steering wheel shroud from the steering wheel. Remove the steering ...

Ad

Question about Renault Sportwagon

1 Answer

...with mounting nuts. Install the spiral cable assembly. Install the combination switch, steering column covers, and the steering wheel. Connect the negative battery cable and enable the air bag

Question about Renault Sportwagon

1 Answer

...switch, steering lock and bracket. Installation To install, reverse removal procedure. Use NEW steering lock bracket and bolts. Temporarily install ignition switch and steering lock cylinder onto ...

Question about Renault Sportwagon

1 Answer

switch from the steering column. Remove the steering column support nuts and lower the steering column. Disconnect the ignition switch wiring. Remove the bolts that secure the steering lock and remove

Question about Renault Sportwagon

1 Answer

...switch inside the steering wheel hub. Once the screw is removed the signal can be lifted up over the steering wheel shaft. Now leaving that, go underneather the dash area and remove the smallpanel ...

Question about Renault Sportwagon

1 Answer

...switch to steering column and install bolts. Raise steering column and install mounting fasteners. Install lower portion of dash. Install multifunction switch. Install lower cover. Install steering ...

switch and water shield from the steering column as a unit. Gently and carefully remove the water shield from the switch by pulling it over the hazard warning switch button and the left multi-function

Question about Renault Sportwagon

1 Answer

...switch-to-steering column screws and the ignition switch. Remove the lockbolt screws and the lockbolt. Remove the switch actuator rack and ignition switch. Remove the steering shaft lock and spring. ...

switch into steering lock housing. NOTE When installing the ignition/starter lock switch ensure that the ignition/starter lock switch and the lock cylinder are in the same position, e.g. "ignition on"

Not finding what you are looking for?
Cars & Trucks Logo

178 questions posted

Ask a Question

Usually answered in minutes!

Top Renault Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...