2003 Kia Sedona "replace cranking position sensor" Questions

...replace it along with any pullies, tensioner and water pump The crankshaft position sensor is mounted on the engine near the crankshaft. Operation The crankshaft position sensor is a Hall-Effect ...

position sensor but still shuts off and gives p 0335 code WHAT CKP SENSOR DID YOU REPLACE I BELIEVE THE SEDONA 3.5L ENGINES HAS 2 CKP SENSORS.YOU HAVE ONE CKP SENSOR LOCATED FRONT OF ENGINE ON THE OIL

...position sensor probable causes Crank shaft defective, Check connector and wiring to sensor, or check trigger wheel for damage Code P0340 reads Cam Shaft sensor Cam shaft sensor defective, Check ...

2002 Kia Sedona Van What would cause this van to shut down every 20 or 30 miles? I am told the crank shaft positioning sensor needs to be replaced.

...replace a crank position sensor on a 04 Kia Sedona first remove the (-) side of the battery...let it cool down for 10 minutes..sensor is usually located near the main drive pulley It can be done ...

...Position Sensor (CKP) etc. because failure of these things will affect BOTH banks, not one.I have seen things like a totally skewed upstream Oxygen sensor on one side cause misfire codes for all ...

replace crank position sensor on a 2004 Kia Sedona Can you please tell me where we can find the crank position sensor on my 2004 kia sodona have wife diagnose problem from her laptop while I am on the

I need to know how to replace the crank shaft position sensor on my 2003 kia sedona Its under the timing cover...

...position sensor and it is coming up the engine is fight to keep the timing. replace the timing belt. the codes po300,po302.po303 are for a rarandom misfire. when was the last tune up. change the ...

position sensor. It is located behind the harmonic balancer, inside the timing cover. It sets by the timing belt, so if you have a loose timing belt it could hit the crank sensor or throw up pieces of