lines are connected, they are quick connects and are help in place with a spring pin, do not remove the spring pins, you just turn the pins to one side and the hoses will pull off, but you will need a
...above rearend. Its a littler hard to see but a easy fix thr fuel pump is located in the tank which is behind the back seat which can gotten to through the trunk area. the fuel filter is a in line ...
...rear is rusted and has a hole in it right above the gas tank. How is the best way to fix it? Take a pair of cutters and cut the rusted line on both sides of the gas tank and at the fitting for the ...
...above the rear axle, slightly towards the front and it looks kinda like a soup can with a hose off each end. My 03 cavalier has a threaded line on the drivers side and a plastic clip holding the hose ...
...lines. There is a clip on the strut to hold the brake line and it's connection to the rubber brake hose. Take the c-clip off and cut the brake line retainer with a hacksaw (careful of ...
...hoses they are clogged up. they deteriorate from the inside. To begin, fill the master then have someone step on the brake, then loosen each line on the master itself...if any air comes out do that a ...
...lines or at the calipers or brake cylinders, I would start by checking for vaccum to the brake booster first. There should be a large vaccum hose going from the power booster down to the top back of ...
...rear, which splits into two above the axle, and now there will be air in both sides. Then, tighten the screw, top off the master cylinder, and you are done. If you simply opened up the bleeder screw, ...
...above the rear axle- if it's clear, test the fuel pump delivery. ps; the original filter elements are hard to get, we usually fit a good in line unit instead, leaving the original filter housing in ...
162 questions posted
Usually answered in minutes!
578 Questions
375 Questions
210 Questions
172 Questions
129 Questions