2002 Hyundai Santa Fe "fix cam shaft position sensor" Questions

...fix her problem she was having. It seems that she had her starter changed and the person who did it messed up the connection to her cam shaft position sensor and didnt know it. The vehicle ran but ...

fix p0018 is it more of crankshaft sensor issue, will a defective crankshaft sensor still allow truck to start truck idles rough but havent noticed poor gas mileage or power issues yet no the purpose ...

...cam position sensor and put in new spark plugs and it is now showing these codes after I had the codes reset I was wondering if anyone can tell me the easiest way to fix this new problem? check plug ...

...cam shaft position sensor A code po341 what sensor is A Check out the Acura discussion forum at this ...

...fix this code p 0457 refers to the EVAP system--leak detected code p 0340 refers to cam shaft position sensor A bank 1--circuit malfunction == causes --wiring ---CMP sensor ---ECM at this point I ...

...cam shaft sensor. it was a p0016 and a p0340 I replaced both of the sensors and the car still will not start. I'm thinking that it might be the timing belt. am i going in the right direction? or just ...

Cam shaft is located so I can replace them if needed? Thank you mcdevito75 here, BEST BET, let the shop do this work, too many un forseen problems could come up. The stalling and unable to start for a

...position sensor work for two days then start doing again any suggestions? the wiring harness may have a short. the best way to fix it is to replace the harness going to the cam shaft position

...is allowed by the following items crank position sensor cam shaft position sensor immobilizer ignition control module check that what you did to fix the engine light didn't intere with something ...

fix it myself? The code is for the cam position sensor for the intake cam shaft.You can clear the code and it may not come back. If it keeps coming back you might want to replace the sensor and double