2002 Hyundai Santa Fe "connector throttle body" Questions

Ad

Question about Hyundai Santa Fe

3 Answers

...is located on the throttle body. Follow your air filter system to the throttle body. Should be two screws and a wire connector. You may have to have the transmission codes reset after replacing

Ad

Question about Hyundai Santa Fe

2 Answers

...wire)--should read 5 volts. Reconnect electrical connector to sensor. TIM......... it sounds like your throttle position sensor has gone out, the sensor is located on the throttle body of the

Ad

...throttle valve opening based on the TPS output voltage. Removal & Installation Disconnect the negative battery cable. Disconnect the sensor connector. Remove the sensor retaining screws. Remove ...

Question about Hyundai Santa Fe

1 Answer

...throttle body. The IAT is a variable resistor which goes up or down with the temp of the incoming air. The Iat sends this info to the ecm in voltage which adjusts fuel injector pulse width. Now that ...

Question about Hyundai Santa Fe

3 Answers

throttle body. Disconnect electrical connector from IAC motor. Remove two mounting bolts (screws). Remove IAC motor from throttle body. Fig. To install: Install IAC motor to throttle body. Install and

Question about Hyundai Santa Fe

2 Answers

...throttle body. Connect the TP sensor connector and the IAC valve connector. Connect the coolant hoses to the throttle body. Connect the vacuum hoses to the throttle body. Connect the throttle cable. ...

...connector at IAC. Remove the throttle and speed control cables from throttle body. Remove 3 mounting bolts from throttle body. Remove throttle body. Disconnect the purge vacuum line from the throttle ...

...connector. Loosen throttle body retaining bolts and remove throttle body assembly from the intake manifold. To install: Clean the intake manifold and throttle body mating surfaces of old gasket ...

Question about Hyundai Santa Fe

1 Answer

...throttle control cable bracket. The MAF sensor electrical connector. The air cleaner intake duct clamp. Torque the clamp to 27 in.lbs. (3Nm). The PCV valve fresh air tube. The fuel injector sight ...

...pipe. Install the heater pipe nut to the throttle body. Tighten the nut to 25 N.m (18 lb ft) . Connect the ETC electrical connector (1) to the throttle body (2). Install the air cleaner intake

Not finding what you are looking for?
2002 Hyundai Santa Fe Logo

1,612 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...