Hyundai Motor 2000 Tiburon "control arms rusted car" Questions

...rusted? Were they trying to scam her? I have always worked on my own autos so is this job hard to do. Seems simple. most front wheel drives do have a rear camber bolts on the inside of the lower ...

...rusted/oxidized) w/the trans clutch safety switch (Ignition Lock Switch) circuit There is also the possibility the burglar alarm relay(starter kill) circuit is 'OPEN'. To check the starter solenoid ...

control arm is rusted off the car can this be fixed If the control arm is rusted up, you can, sand it up, prime it up, and undercoat it with rubberized undercoat. You can replace it with a used one in

...rear passage tire leans outward from the top whats to cause of it Sounds like a bent control arm or strut. I’d check the lower control arm bushings and if they are ok check for rusted out

...control arm bolt. Please help Try a specific oil like 3-IN-ONE® Fast-Acting Penetrant
Patience, may best to wait overnight or days to prevent over powering, breaking a bolt.

There are many ...

...there is no rear end on a front wheel drive car... all control arms attach to the body of the car and can be replaced if you ant to deal with the rust involved if it rotted off in the first

Lower ball joint 2002 hyundi santa fe Typically these are replaced with a complete lower control arm. What happens is the ball joint is reseeding the lower control arm and rusts. When the old ones ...

...control-arm.html#post3510098 If you decide to work on the front side lateral arms (still rear of car), that's when it gets REALLY hard ...

control arm. it is almost impossible if it has rusted you will probably have to break it off and replace the two tie rods on the end. or get a pair of flat vice grips and put them between the ball and

...control arms to the trans mount on BOTH sides WTF? The rest of the truck is mint BIG problem!  Have a welder look at it, and see if he can weld on some support plates there for reinforcement. ...