Question about Hummer H3
...key and I will be fine Programming Theft Deterrent System Components Important: When replacing a body control module (BCM) with an GM Service Parts Operation (SPO) Replacement Part, set up the ...
Question about Cars & Trucks
...key hole is what usually goes bad. GM sell a kit that comes with a new lock tumbler and halo, but usually you just need to replace the halo. Then go thru the key relearn again and all should be good. ...
...GM bought a new key and code. Done the 10 min re-leatn and 30 minute relearn, still not starting. Got the scanner and cleared all codes, and did the relearn again and still not starting. Any ...
...GM keys (both ignition keys & door keys). Car has pass key II anti theft system turn the igntion on, don't start, let it set for ten minutes Turn it off for 5 seconds then try to start it. If ...
Question about Pontiac Cars & Trucks
...GM SPO Replacement Part, perform the procedure to setup a new BCM prior to the 30-minute relearn procedure. With a master passkey III key, turn ON the ignition, with the engine OFF. Observe the ...
...GM key. any copied keys can cause the system to malfunction. if you have a GM key, try this: turn the ignition ON, DO NOT START. leave in this position for 15 minutes. start the car. this is the ...
1,120 questions posted
Usually answered in minutes!
180 Questions
91 Questions
110 Questions
71 Questions
11 Questions
