...fuel being supplied at injector rail by removing quick disconnect fitting hose to injector rail carefully with rag under try to remove slowly as soon as fuel spurts out when nearly fully off, is good ...
...side in front of gas tank No duck bills in my tool box just tools. Use a fuel line disconnect tool ask at parts store they will have them remember metal is easier to use and last longer than ...
Question about Cars & Trucks
...fuel rail like all , intake manifold injectors used;. all injector held down by both rails. left and right now the steps to off them if is the job, pull the isolator seen photo 1, far below. 1: pull ...
Question about Cars & Trucks
...but injecters are not firing? If you have fuel pressure at the rail, you probably have a failed crankshaft position sensor. Use a scan tool to look for diagnostic trouble codes, and for a CPS
used miller tool, 6539 do research online for your fuel rail needs and adapter. i must have tool to do the injector balance test. impossible to do unless you have 2 people. 1 under car and one at rail
...fuel rail with a covered scharder valve to do this. Just remove the cover, save in a safe place for reuse. Then with a small nail or similar item press in on the small pin to releive the pressure. ( ...
...Tool Loaner program" where you can borrow tools for free,w/a deposit of course,then follow the steps provided; MPI Fuel System Pressure Test The MPI fuel system used in vehicles equipped with a 4.OL ...
...tool. Fuel pressures should be the same for both parameters. ? If the Actual Fuel Rail Pressure is less than the Desired Fuel Rail Pressure, refer to Fuel System Diagnosis - High Pressure Side. ? If ...
...tool fitting that fits the cars schrader valve. one guy said where is, well the car has fuel rails see those 2 hoses both to rear of car. one has the valve. look carefully. login to alldata.com and ...
Question about Ford Cars & Trucks
.... Do you have a fuel pressure gauge ? If not AutoZone has loan a tool available . You can use a tire gauge to it will let you know if there is any preesure at the shrader valve on the fuel ...
408 questions posted
Usually answered in minutes!
554 Questions
540 Questions
410 Questions
0 Questions