2000 Daewoo Leganza "put oil pressure switch" Questions

...put it into drive the oil light comes on. now, we have replaced the oil pressure switch , changed the oil, and the oil filter is tight and fine. what could be the problem? also the engine light comes ...

oil pressure switch I need to know where the oil pressure switch is in a 1992 Pontiac Sunbird SE and how to tell if it's bad. Pressure switch is usually located near the oil filter and generally has ...

oil pressure switch. Once the engines oil pressure is reached to operating pressure the computer shuts off the voltage from the oil pressure switch and turns on the fuel pump relay intill you shut the

that and the problem still exists, it appears to be coming out between a gasket and the pressure switch. anyone know where it could be leaking from??? did you put teflon tape on the oil switch threads

...put 100 km on car. Shop says its not the oil pressure switch and feel it is a dash cluster issue. Never did this before the engine rebuild. could they be correct or just not wanting to put in another ...

oil pressure.put a pressure gauge and measure it.check for oil leak around oil pressure sender Hello, If you oil levels are ok and your not burning or loosing oil then they only thing that it could be

really be low oil pressure, or a faulty oil pressure switch/sender. I would remove the pressure switch and put a gauge on it. it you have good pressure at idle then i would suspect the pressure switch

...put in ,an oil pump, sending unit,4 engine flushes.pcv breather Low oil pressure is often an indication that your crank shaft and/or camshaft bearings are worn out (on high mileage cars). Have you ...

...together on the oil filter housing. Make sure you replaced the right switch. You want to get this straightened out quickly as VW engines are very unforgiving when you put off repairs. Hope this

...put a mechanical gauge on there and check actual oil pressure...problem may not be the switch but in fact there may be no pressure. Does the engine make noise when running? Do you have the correct ...