2000 Daewoo Lanos "replacing leganza camshaft position" Questions

camshaft sensor on a 2001 Daewoo Leganza. I wanted to know how and if there is a diagram or step by step instructions somewhere. hi, it is under the upper timing belt cover between the camshaft gears.

...camshaft position sensor on 2000 leganza? This is covered by Daewoo under warranty. Contact DaewooUSA and they will send you instructions and warranty information. I had mine fixed under warranty in ...

camshaft position sensor replaced and still when I accelerate it stalls and barely moves like its not getting enough gas then it just picks up and goes...and the engine light has just started blinking

...Camshaft Position (CMP) sensor connector Spark plug wires from the plugs Valve cover nuts, washers, cover and gasket NOTE: Be very careful not to nick or scratch the camshafts. Hold the flats of the ...

...camshaft position sensor for 2001 daewoo leganza. Anyone know where the part is located under the hood? The cam sensor is mounted on the cylinder head behind the cam sprockets with two bolts. You ...

Leganza share the same engine from 1999 - 2002. This might help, it is a diagram of the cam position, timing marks (cam and crank) and all other related. Additionally, an excerpt from a post here... "

...Leganza How to set timing You will need these tools: 13mm open end wrench 10mm shallow and deep socket 8mm socket long flathead screwdriver 17mm deep socket T50 torx socket 1/4", 3/8ths and 1/2" ...

leganza You will need these tools: 13mm open end wrench 10mm shallow and deep socket 8mm socket long flathead screwdriver 17mm deep socket T50 torx socket 1/4", 3/8ths and 1/2" ratchets and extensions

...camshaft (which moves the valves) stops first, and the crankshaft (which is moved by the pistons during a "power stroke") continues to move. Any valves which are in the down position get hit by their ...

...camshaft cover is at so how is it easy with my 2001 daewoo leganza v tech 16 V 2.2L engine ? please reply to this so I know how to take off the camshaft cover so I can replace the bad camshaft ...