...Torque bolts in sequence (looking down on the engine from front of car) belts 1 3 9 5 7 trans belts 2 4 10 6 8 trans Step 1: 18 ft.lbs. (25 Nm) Step 2: Plus 60 degrees Step 3: Plus 60 degrees Step 4: ...
...Torque values Stage 1. 40-45Nm first pass Stage 2. 85-90Nm. second pass Since you have the head removed look for carbon build up on the pistons. You may want to get a car service manual from the ...
...1.6L dohc head torque is as follows , step 1 = 18 ft. lbs. , step 2 = 70 degrees , step 3 = 70 degrees , step 4 = 30 degrees . sequence is as pictured . there ya go , gears to the left , looking at ...
...torque bolts, new gasket set, payen head gasket hooked up everything and.... Nothing.... It has spark at the sparkplugs(tested all 4),has fuel, timing is lined up with its marks. It turns,sparks but ...
...torque wrench. The fasteners don't need to be really tight, but they must be evenly tightened if you don't want to distort the sump and cause a big oil leak. About the only places a socket ...
1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the
...1: torque in sequence to 51 Ft/Lbs Step 2: torque again in sequence to 51 Ft/Lbs Step 3: final tighten all bolts an additional 90 to 100 degrees recheck final torque in sequence *** CAUTION ***engine ...
...1: torque in sequence to 45 Ft/Lbs Step 2: torque in sequence to 65 Ft/Lbs Step 3: torque in sequence to 65 Ft/Lbs again plus 1/4 turn Step 4: Torque small bolt in rear of head to 25 Ft/Lb Recheck ...
...1.9 dohc cylinder head torque specs and sequence Cylinder head bolt tightening procedure: CYLINDER HEAD BOLT TIGHTENING SEQUENCE: INTAKE SIDE 8 4 1 5 9 7 3 2 6 10 EXHAUST SIDE In sequence, torque the ...
Question about Daewoo Lanos
...1 i need torque settings for the engine ie head bolts etc i am replacing the heads on a GMC 350 cu in engine. what is the final torque of the head bolts? For 1985 Chevrolet Camaro 5.0L 4BL OHV ...
728 questions posted
Usually answered in minutes!
554 Questions
410 Questions
304 Questions
0 Questions
