1989 Land Rover Range Rover "checking atf fluid level" Questions

...ATF for the gearbox and 80w-90 for the diffs and transfer box. engine and gearbox have dipsticks for the levels, the diffs and transfer box have removable plugs for level checking, fill until the ...

...too much, is this normal or do I have too much fluid? The atf fluid level can only be checked when the car is running and at temperature (not cold) the level will be high when the car is not ...

...ATF) checking: 1. Requirements for check: 1.1. Vehicle standing on level surface. 1.2. Transmission must not be in fail-safe mode. 1.3. Shift lever in "P" position, parking brake applied. 1.4. Engine ...

fluid ages, but if the ATF is brown or has a burnt smell, it is badly oxidized and needs to be changed. Varnish on the dipstick is another indication of worn out fluid. You can also do a "blotter test

...ATF) checking: 1. Requirements for check: 1.1. Vehicle standing on level surface. 1.2. Transmission must not be in fail-safe mode. 1.3. Shift lever in "P" position, parking brake applied. 1.4. Engine ...

...ATF level plug from oil pan. CHECKING PHYSICAL QUANTITY If ATF drips out of hole: ATF need not be topped up. -Install new seal on plug and tighten to 15 Nm11 ft lb). ATF check is completed. If ATF ...

...ATF fluid: Locate the transmission dipstick. It is typically located near the back of the engine on the driver's side. Pull out the dipstick and wipe it clean with a rag. Re-insert the dipstick fully ...

...ATF) checking: 1. Requirements for check: 1.1. Vehicle standing on level surface. 1.2. Transmission must not be in fail-safe mode. 1.3. Shift lever in "P" position, parking brake applied. 1.4. Engine ...

...ATF) checking: 1. Requirements for check: 1.1. Vehicle standing on level surface. 1.2. Transmission must not be in fail-safe mode. 1.3. Shift lever in "P" position, parking brake applied. 1.4. Engine ...

...ATF) checking: 1. Requirements for check: 1.1. Vehicle standing on level surface. 1.2. Transmission must not be in fail-safe mode. 1.3. Shift lever in "P" position, parking brake applied. 1.4. Engine ...