2004 Lincoln LS "thermostat changed bled system" Questions

Ad

changed it,bled it now no heat Turn the heat control to max and remove radiator cap - add coolant as much as possible. Make sure overflow container is filled to correct level - then Start car and run

Ad

...stick,and is causing the engine to over heat,therefore condenser is not cooling the freon down enough to cool.Have the thermostat changed and the cooling system bled out,this is most likely the

Ad

Question about Lincoln LS

1 Answer

...changed the thermostat and basically told me it has him baffled. He could not find anything wrong with the car! Took it to the local FORD dealer, (yesterday) was told that there was a air pocket in ...

...thermostat. but the car never overheated unless i forgot to add coolant. that happen like monthly. i decided to get the part and replace it myself. when i change it i ran the car and it overheated on ...

...changed the thermostat and basically told me it has him baffled. He could not find anything wrong with the car! Took it to the local FORD dealer, (yesterday) was told that there was a air pocket in ...

...changed water pump and therm car now has no heat and runs hot there should be no air in the cooling system and the system can be bled by using a pressurising equipment . Ensure that the thermostat is ...

Changed thermostat,bled system from bolt above thermostat and was fine. Now the car is overheating and no heat at all. Changed thermostat,bled system,checked for flow in radiator everything good. Heat

...goes crazy instead of showing the actual temp Check the thermostat, electronic coolant temp sensor, .. or if the system has been opened ..ex changing the thermostat. . Has the system been bled of

Question about Lincoln LS

1 Answer

...bled? thermostat is on the waterpump. Follow the lower radiator hose to the housing. there should be three 10mm bolts should be holding the housing to the waterpump with the thermostat in between. If ...

...changed the thermostat,if so there is air in the cooling system and needs to be bled out,water will not be in contact with the temp gauge,the reading it is getting is from steam.if not,it may be time ...

Not finding what you are looking for?
2004 Lincoln LS Logo

870 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Lincoln LS
2000 Lincoln LS

1,383 Questions

2002 Lincoln LS
2002 Lincoln LS

1,094 Questions

2001 Lincoln LS
2001 Lincoln LS

898 Questions

2003 Lincoln LS
2003 Lincoln LS

442 Questions

2005 Lincoln LS
2005 Lincoln LS

270 Questions

Top Lincoln Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...