1996 Lincoln Town Car "need weld converters" Questions

...that stop the engine light from coming on or would i have to replace the whole converter? You need to replace the catalitic converter. If you try to weld it the heat will destroy the interior

...after a few minutes of running. your converters are pluged up they need replaced or cut off and new pipe welded in i have cut 2 of mine off allready and it has more power then it did when they were ...

...The Check engine light will be on because of the rear O2 sensors. To keep the light off you will need to install O2 sensor

...replace it, need to know if it's welded on my car or does it have screws? all catalytic converters are welded on. My ford has 4. Check with dealer, all converters are supposed to have a ife

...need them,I will check at the auto parts store, to see if OEM Converters are available. Then I will remove the two factory ones and weld in the new ones,duplicating the factory set up. They should be ...

...this myself? Do I need a muffler clamp and/or need to do some welding? What do you suggest? It will need to be welded.Take it to a good welder and have them weld a new piece of pipe on it.Good

...need some peices of exhaust take the old unit and the new one to a welding shop have them make you new one the same length as the old one and cut the flanges off the old one and weld to new one all ...

need to weld it in place. Normally since the location of the converter is directly under the cabin you would want a professional to do the work to ensure there are no leaks. A leak in the exhaust here

...need to buy the direct replacement which will cost a good amount of money (hundreds) or you can buy an aftermarket which you will have to cut out and weld in. I recently bought an aftermarket ...

...BUT IF SOME HAS CHANGED BE FOR IT MAY BE WELD ON SO IF ITS STILL BOILT ON YOU WILL NEED TO RASE CAR UNBOILT IT AND PUT NEW ONE ON IF WELDED YOU MAY NEED TO GO SOME WHERE THEY CAN WELD NEW ONE IN ...