1992 Lincoln Town Car "gear shift" Questions

...GEAR AND WONT SHIFT TO THIRD I CAN PUT IT IN N AND BACK TO OVERDRIVE THEN IT SHIFTS. Most likely your shift cable (from the selector to the transmission) is worn, maybe needs lubrication. Mine had a ...

Gear shift if difficult to shift from park to reverse or drive. Gear shift is difficult to move into reverse or drive Your Gear Shift Rod Cylender Tube is cracked or broken. Will have to drop your ...

...shift only when overdrive is off. why does my 1994 lincoln town car only shifts when overdrive is off. first thing to check is transmission oil level and quality. If that is fine than your looking at ...

...shift to third gear while driving my 93 buick lesabre the transmission will not shift into third gear U need to have a trouble code test run to see if the 2-3 shift solenoid inside the trans is ...

...shift into any gear, Is this correct? Normally, I would say this isn't an electrical issue, it's mechanical, either something in the shift column or the shift linkage is broken or come loose so I ...

...gear it doesn't shift. It's like the clutch engages but no shift so the trany is dis-engaged. You can rev the engine and nothing. It drops below 42 and the trany re-engages. Got any ideas???? hello ...

...shift out of first gear until i hit 30-35 m.p.h. Manually shifting from first to second gear is no problem but once i put it into drive it has the same problem again. the other thing is that it wont ...

gear shift is frozen in park put your foot on the brake ,if your brake lights are out the wont wont shift out of park you need a brake switch If you need to use the car, turn the ignition key as if ...

gear shift leakage is a little sloppy. How can I adjust this myself. Have reasonable skills and limited funds. Shop said they could tighten for around $50.00. I have access to a lift and enough tools.

...gear shift wont go into gear. Nothing but play in the whole linkage look under the hood on the firewall where the shift linkage comes through, the most likely cause is the rod popped off and needs to ...