weight. Rear tires wear out on the inside edge. Lots of tread left everywhere but frayed steel on the inside edge. Looking from the rear the tires now have a noticable "lean" to them (tires are angled
...or hooked up jump leads the wrong way around ,go to local weights and measures dept or trading standards depending on where you live ,this is the garages fault thats for ...
Question about Cars & Trucks
...weight to this hypothesis. If you are sure your oxygen sensors are good (I assume you've already read out any engine service codes), then the next step is to check for leaky injectors or a shorted ...
Question about Hyundai Santa Fe
...weight of the engine is no longer being applied to the engine support bracket. Remove the upper engine mount. Spraying lubricant, slowly remove the reamer (alignment) bolt and remaining bolts and ...
standard tires, (in USA the law requires stock tire data on the dirvers (left) door jamb) but when you dont use stock tires, then you get to be mr. engineer. in that case every tire maker in the world
Question about Cars & Trucks
...standard size of a bolt (setscrew) with a 10mm head is a 6mm diameter (usually 6 x 1 (the 1 being the thread pitch)). It gets more complicated when very few vehicle batteries are held down by 6mm ...
2,414 questions posted
Usually answered in minutes!
1,043 Questions
1,001 Questions
881 Questions
417 Questions
235 Questions