2004 Hyundai Santa Fe "remove oil control valve" Questions

Ad

Question about Hyundai Santa Fe

1 Answer

oil is clean,no leaks,engine light stays on. No loud sounds from engine(very quiet) dear friend-it sounds like the idling control valve needs to be cleaned remove from trottlebody and clean with brake

Ad

Question about Hyundai Santa Fe

2 Answers

remove the oil control valve and clean it out and re install it and an oil change with nice clean oil is good for them too.The ocv valve is located when plastic engine cover is removed,on the front rh

Ad

...remove oil pump chain tensioner. 16. Remove oil pump sprocket T45 retaining bolt, then remove oil pump sprocket and oil pump chain. 17. Install righthand camshaft phaser lock tool No. 10202, or ...

Question about Hyundai Santa Fe

1 Answer

...remove gasket material; only use manual scrapers. Do not scratch or gouge aluminum sealing surfaces or oil leaks may occur. NOTE Do not use any sealer with a silicone-type gasket. Install the three ...

...Remove the oil control solenoid and bushing. Inspect the camshafts for wear. For additional information, refer to Section 303-00 . Installation Verify the valve clearance. For additional information, ...

Question about Hyundai Santa Fe

1 Answer

oil control valve/selenoid valve location please, as not sure where is this valve and what it does. IT'S WHERE YOUR OIL FILTER IS,REMOVE AND YOU WILL SEE,IT'S WHERE THE OIL ENTER'S THE FILTER.

...oil pan. Remove the timing chain cover. Loosely install the crankshaft pulley. Compress the timing chain auto-tensioner Turn the crankshaft counterclockwise to compress the auto-tensioner. Lock the ...

...Remove the oil cooler inlet hose (1) from the retainer on the control valve body cover. Remove the oil cooler outlet hose retainer nut (5) from the control valve body cover. Remove the oil cooler ...

...oil pressure is supplied to the pulley hub, changing the position of the hub, thereby advancing the intake valve timing. 1 Remove the VTC valve from the vehicle. 2 Using a fused jumper wire, apply ...

Question about Hyundai Santa Fe

1 Answer

...oil feed sensor electrical connector. Disconnect the crankcase ventilation tube. Remove the appearance cover. Position the throttle cable out of the way, and the speed control cable (if equipped). ...

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

2,414 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...