2004 Hyundai Santa Fe "brake line clogged" Questions

...brake and gas so it would not die. Added gas. No change. This has never happened before. Someone will need to have the computer scanned for trouble codes to proceed with troubleshooting the problem. ...

...brake line. need diagram What symptoms are you getting? If a caliper is dragging it may not be the brake line. Make sure the master cylinder isn't overfilled so the fluid can expand. Brake lines ...

may have a bad master cylinder or a brake line has clogged or failed. The flexible lines that run from the hardlines to the wheel do degrade over time and can clog up and not allow brake fluid to flow

brake line, or the rubber brake hose could be clogged, you must trace the hose and metal line back to the master and look for leaks or rust, then unscrew the line from the master and make sure you get

...line out the back bleeder valves if there is nothing rusted closed or clogged It is possible to detach the master cylinder and blow air through the brake lines to the bleeder valves if there is ...

...brake pads all around and put new line on the back. It had good brakes on the back when I started. Have some one pump the break up and hold the peddle doun to the floor and take back break line loose ...

...line backwards and crack lines open to see when and where the clog begins. Sometimes the abs unit can become clogged because brake fluid breaks down and becomes a sludge because hardly anyone flushes ...

...brake line from you local auto parts store, and don't let them tell you compression fittings won't work, I have used them for years and not once has it leaked, they make compression fittings just for ...

1986 toyota 4x4 pickup brakes go to the floor Check your brake lines/connections for leakage and clogging. Any leaks/clogs? Fix the problem spots. Then bleed the system. This is best/easiest done with

...is stuck and the driver rear seems like it's partially engaged. Try disconnecting the brake line to the rear pass side wheel cylinder the brake lines might be clogged or the cylinders are going ...