2003 Hyundai Santa Fe "wiring loom faults" Questions

Ad

my grans hyundai getz 53 reg had an abs fault, i tried my bosch kts an snap~on solus but would not give any fault codes, i borowed a friends diag tool an it found an engine mgnt fault in abs system, i

Ad

Question about Hyundai Santa Fe

1 Answer

...wiring in loom at back of engine where main engine harness meets the bulkhead. There is a screened cable grey/pink that houses the two O/S/F ABS wires blue and pink. The loom copex cuts through the ...

Ad

...wiring loom at the base of the steering columna at the hinge where it tilts. Check for any loose plastic interconnection blocks or chafed or broken wires in the wiring loom around the base of the ...

...wiring loom as a brake in it, engine management light was flickering & it was running rough was checking vacuum hoses when moved wiring loom by accident & notice change in engine tone, the ...

...wiring loom of the car better to take it to an auto electrician who knows what their doing Hope this helps Nick This type of fault usually occurs when there is an earth fault, i would be checking ...

I have a 2008 mini cooper s convertible. I recently received failure codes P1747, P0700, and P1611. I have looked everywhere online and the only explanation I can find is the TCM. I have also looked ...

Question about Vauxhall Cars & Trucks

1 Answer

the problem is probably the engine wiring loom,what happens is the oil leaks into the loom and ends up at the plugs for the ECU and the coil pack and crank sensors,meaning they all need to be replaced

Question about Volkswagen Cars & Trucks

1 Answer

solenoid 3 fault vw golf 1997 solenoid #3 fault Hi. plase do a wiring check and make sure that there is no brake in the wiring. there is a loome in the gearbox too. If the wires are ok then a new ...

...more positive the reason it happens is the oil slowly works its way along the wiring loom between the copper strands and the insulation the whole problem is the injector loom inside the cylinder ...

wiring or the ecu. Check the connections on the loom sides give the wires a gentle tug (don't pull them out) look for short circuits loom damage etc. hi,its nearly always the upper lamda sensor heater

Not finding what you are looking for?
2003 Hyundai Santa Fe Logo

1,586 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...