my grans hyundai getz 53 reg had an abs fault, i tried my bosch kts an snap~on solus but would not give any fault codes, i borowed a friends diag tool an it found an engine mgnt fault in abs system, i
...engine light (yellow light) comes only when the computer control unit (called the PCM) senses a fault in the electronic controls of the engine and/or the emission system u will seldom feel the
...to a retail auto parts store and ask them to hook up a scanner to your OBDII port to read for fault codes-write the codes down and come back on here for answers to your problem(s)-this is done ...
...in Australia & have a Hyundai Grandeur XG 3LT V6 2002 model (US equivalent is Hyundai XG300). Fault codes are P1118 (ETS motor fault) & P1178 (ETS motor battery voltage open). An ...
...check electrical connection or how to check the sensor itself . the light will stay on untill the fault is corrected if you get it cleared off it will come back on and it will only stay until the ...
P1162 fault on hyudia santa fe does anyone know what the above engine fault is? P1162 High Pressure Pump & Fuel Line
hyundai santa fe 2003 diesel difficult starting ok when started.glow plugs all ok. high pressure diesel fault?low pressure pump tested ok.help CHECK INJECTOR LEAKAGE COMMON FAULT WITH BOSCH INJECTORS
...start I was accelerating to get on freeway when the car died instantly then wouldn't start run fault codes and check for cam/crank sensor fault. Check that the cam shaft is turning (broken
Fault code po094 Engine management light came on . I had the vehicle scanned the fault code po094 was stored .after a few times of trying to erase the code it was not clearing"? try fixing the problem
engine lights on The engine light is telling you of a possible fault in the engine anagement system. best have the cpu codes read for the fault if any
1,586 questions posted
Usually answered in minutes!
1,503 Questions
1,043 Questions
881 Questions
417 Questions
235 Questions