2000 Hyundai Accent "tell clutch starter safety switch" Questions

...clutch sensor and neutral safety switch ,, all the relays are good,, batt is new,, no factory alarm, no PWR anything !!!!! Help can any one tell me where is the M101 switch is located ??? Thanks in ...

...starter. I'm still having the problems. The check Engine light came and it was a sensor and crack in the exhaust. But that had nothing to do with my problem. Every time i bring it to the garage, it ...

nuetral wheel choked e brake on and some one there as for safety and direct the starter this only tell you the starter works,but from what you describe I have to say your safet clutch switch is non op

...clutch because my starter is good and i can push start my car,,, but it wont crank,, there is no clicking when i turn the key or anything try to have someone push the clutch and hold the key ...get ...

...switch. starter relay, clutch safety switch, or starter......... have someone get a starter bypass and try to see if it starts. any parts store will tell you if its bad. good luck mark as fixya ...

...allows starting in neutral or park. If it is a manual transmission, it is usually on the clutch petal pivot. The best way to tell is with a test light, looking for power at these different

...tell me a bypass or help? Test Battery connections for continuity, if ok, use heavy duty test lead and connect live side of battery direct to starter motor. If the engine cranks, the fault may lie ...

...clutch the floor no starter nothing can't tell if it's Parks or not what do I do Just bought it never had the transmitter key for it trying to figure out what to do I know Ford first generation ...

starter as a candidate. The other things that can cause this are: Faulty clutch safety switch (manual trans) Fault park/neutral safety switch (auto trans) Faulty ignition switch Faulty ignition relay

...clutch safety switch needs to be adjusted. if it is automatic, then neutral safety switch is the problem. Try shifting from Park to Neutral position on the gear selector and try starting. Check for ...