...sudjestion? thanks i think you should get the nozzles and pump serviced did you check the piston sleeves and the crank, main bearings when you changed the
...as per dipstick showing low) between 700 ml to a litre in around 1000 kms. i recently got the rings piston and sleeves replaced and for some time it seemed ok but after about 10000 kms the problem ...
...bore.Some have them cast with the engine block.Some have a sleeve that is put in after the casting.this one is sometimes removable and may be replaced.A common term is the piston sleeve.Hope this ...
...i say stagger i mean the gaps in each ring are in a different position so as not to create a bypass of pressure or oil. if you use the compressor the piston should slide into the sleeve of the ...
Question about Cars & Trucks
piston will be very noisy especially under power. There can be expected oil consumption with a noticeable miss in the sound of the engine. I would be doing a pressure test on the radiator to check for
A/C making a rattling noise when i turn on the a/c in my truck it makes a loud rattle noise. it works just fine, but i need to know why all the noise it is making. I'm assuming that your '89 Chevy has
Question about Cars & Trucks
...sleeve will move causing catastrophic damage to the piston, cylinder wall and head. to answer your question no I have not. I don't understand you kept cutoff wheel centered. How did you ensure ...
Question about Hyundai Cars & Trucks
...above the block top for a Hyundai D4AL, Std Bore 100mm Diesel engine. thank you the sleeve protrusion is 1mm above the block surface. the piston will be level with the liner(sleeve) protrusion ...
...piston out, replace the sleeve, and use a ring comprssor to get the piston back into the cylinder and then put it all back together EXACTLY how it came apart including position on the sleeves, rods ...
...PISTON INTO THE CYLINDER SLEEVE WHEN REMOVING THE HEADS FROM THE BLOCK TWO CAST IRON CYLINDER SLEEVES CAME OUT WITH HEADS. THERE IS LITTLE TO NO ROOM TO BE ABLE TO COMPRESS THE RINGS AND SLIP THE ...
1,518 questions posted
Usually answered in minutes!
1,082 Questions
1,047 Questions
517 Questions
500 Questions
255 Questions