2000 Hyundai Accent "manifold gasket problems" Questions

manifold come together? The gasket or the silicone bead has slipped into the valley or the sil. was messed up when you set the manifold on . Pull the manifold and check your work, It happens to all of

...manifold gasket had split between cyls inlet ports and resulted in missfire on 2 cyls adjoining on removal of manifold the gasket had been damaged whilst reassembling new gasket cured missfire which ...

...vacuum leak try spraying starter fluid around the intake manifold gasket and vacuum lines when you hear a change in idle you have found the leak if no leak check compression may be a blown head ...

...stop and go traffic seems to aggrevate the problem engine light is on inlet manifold either loose or gasket blown running to rich in fuel could also be a problem or something with the air ...

...manifold intake gasket causing the problem. Change the gasket (8$) + 1.5H of work and car runs like brand new. We identified the problem by spraying some brake cleaner on the gasket. The engine would ...

...the proper spark to your spark plugs. What I found with my vehicle was a small leak in the intake manifold ...

...manifold could have been blocked causing your dipstick to be removed from its socket and blowing oil from inside because of pressure. 2. the gasket on the oil filter could have been ...

...manifold warps causing the gasket to leak, not so much a gasket problem. They recommend replacing the lower intake manifold & gaskets. A local repair garage has a complete kit which includes the ...

...manifold gasket that needs replaced if the diagnosed correctly. It is on the top of the engine. If your husband properly replaced the intake manifold gasket and you still have the problem then the ...

...manifold gasket will need to be replaced. There is an updated manifold gasket, manifold bolts, and torque specification. Call the chevrolet dealership and see if they will extend the warrant on this ...