2000 Hyundai Accent "burned rod bearing" Questions

1998 Hyundai accent 1.3 engine noise tapping sound Hi i have a 1998 Hyundai accent 1.3 and it burns a lot of oil it does not smoke badly but seems to use oil at quite a rate also and my main problem ...

quickly destroy and often break a rod, over reeving the engine is the most common cause, also a burned out bearing, any thing that causes the rod to exceed it structural design specs will make it fail

as fast as I want it to. any thoughts are you sitting down.........has someone been doing burn outs in the parking lot? sounds like a spun bearing. drop the oil pan a inspect all rod and main bearings

3, 5. The lower rod that sits right under it has the other gears on it. Each one of those rods have bearings on each end. The upper rod may bearing may be bad and may have come apart inside the trans

...to flash. I immediately stopped the car and it then refused to start It sounds very much like you may have spun (burned) a rod bearing or a main bearing due to lack of lubrication. Thank you, ...

96 camry shut off and restarted and is knocking idles fine slight knocking sound Check oil level that engine seems to burn it internally knocking could be rod knock or bearing.

Best additive for blow by please There are none that work, trust me on this. Use an oil thickener (like STP)and you risk burning out the main and rod bearings on newer tight clearance engines made ...

white smoke comes out of tail pipe and burns at least almost a quart per week, what causes it. Please help Usually white smoke all the time indicates a leaking head gasket (leaking coolant in the ...

...Rod or Main Bearing Clearances.2     Inspect     Rocker Arm  -   Worn or Incorrectly Adjusted Rocker Arm(s).3     Inspect     ...

what could happen if u lack on oil and ur car burns it all up and if you dont add oil often what could be the problem numerous things can fail. big end bearings in the crank. cam can seize, damage con