2000 Hyundai Accent "belt tensioner" Questions

...belt tensioner and pry the tensioner away from the timing belt, using a screwdriver. While holding the tensioner away from the belt, loosely tighten the two bolts to hold the tensioner in its current ...

...belt and tensioner cost £50 here in uk ? it is not too difficult diy job approx 2hours the engine must 1st be set to TDC number 1 firing then at this setting the cam cog mark is a hole drilling ...

...belt tensioner clockwise to release the drive belt tension. Remove the drive belt from the alternator. Slowly release the drive belt tensioner. Remove the drive belt from the accessory drive pulleys. ...

Serpentine belt screeching the belt is bad or the belt tensioner is bad. replace the belt and if it still screeching then replace the belt tensioner

...belt & tensioner on my car? I've read a few places online it's around 2.5-3hrs, the stealership quotes 6hrs. if this is a 4 cylinder then it will be about 3 hours. you should replace the belt ...

...at your pictures as to how the belt was originally installed.You'll need to move that tensioner enough to replace the belt.After replacing the belt make sure it's on 100% before starting the

tensioner arm. Since it typically is cheaper and quicker to replace the belt(s), I would do that first. If that doesn't fix the issue... the next potential problem would be the tensioner arm or pulley

belt with all the slack on the tensioner side.  Loosen the tensioner clamping bolt to release the tensioner, let it self-tension with the spring force, and retighten the clamping bolt.  Turn

...tensioner. Then you have to loosen the big bolt that is on the other side of the alternator. You may have to take off your power steering belt to get to the alternator belt. Now do the opposite to ...

...tensioner is NOT spring loaded - it's adjusted by the technician who installed it. Take it back and tell them to FIX IT! it is a tight belt, it doesnt need a tensioner the technition put on tooo ...