Hyundai Motor 1999 Elantra "wheel bearing nut cotter pin" Questions

...wheel bearing assembley Well if you have any kind of mechanical background this is usually a simple fix. Start by jacking up the car, and securing it with a jack stand. Next remove the tire. (I ...

...wheel bearing adjustment, raise the front of the vehicle. Grasp the tire at the sides, and alternately push inward and pull outward on the tire. If any looseness is felt, adjust the front wheel ...

...wheel bearing in a 1995 lincoln towncar remove wheel, brake caliper, dust cap, cotter pin, nut and washer, remove outer bearing. re-install nut a few turns and pull off rotor catching the inner ...

...wheel bearing play of 0.001-0.006 inches (0.025-0.152 mm). Removal & Installation 2002-05 Models Before servicing the vehicle, refer to the precautions at the beginning of this section. Remove or ...

Wheel Hub Bearing 2002 Jeep Grand Cherokee 2 wheel drive Replace Front Wheel Hub Bearing 2002Jeep Grand Cherokee 2 wheel drive Removal Raise and support the vehicle. Remove the wheel and tire assembly

...bearing and the nut, tighten to spec and install the outer nut cotter pin keeper thingy. bend the cotter pin and cut off the excess so the dust cap will fit on and tap it into place. Re-install ...

...wheel bearing? if its not a drive axle and only has a castle nut with a cotter pin , then regrease the wheel bearings and run nut all the way in to its hand wrench tight (not impact gun), turn wheel ...

...wheel bearing's, remove cotter pin, spindle nut slide rotor out, remove wheel bearing, repack new bearing with grease and don't forget to replace grease seal's, install new part's adjust spindle nut ...

SPINDLE NUT.SPIN THE WHEEL FORWARD BY HAND THE TORQUE NUT TO 12 FT LBS TO SEAT BEARING.THEN BACK OFF NUT 1/4 TO 1/2 TURN TO UNTIL HOLE IN SPINDLE LINE UP WITH SLOT IN NUT.THEN INSTALL A NEW COTTER PIN

...wheel bearing is loose and needs to get fixed, but the mechanic said it would be around 300$, and i don't want to spend that much if I can fix it myself. Can you fix it yourself? Remove the steering ...