1998 Hyundai Elantra "power steering squeal belt" Questions

...power steering fluid Could still be the belt. I've had cheap belts squeal, and an OEM belt works perfect. A worn out belt can do it too. If you can do it yourself, go ahead and plan on replacing

...power steering drive pulley. A worn and dry belt may tend to squeal as the extra grip on that pulley is applied. You would have to pinpoint just where the squeal is coming from to be sure the power ...

...power steering belt , fan belt , car has over 104,000 km's on it. what should i do? They are new belts. thanks, james check the tension. cheap belts will stretch. if after you retension them ...

Power steering belt squeals when first start.Have no power steering ,pump will stop when at full travel both whys.Have replaced belt twice will help for awhile.Belt very tight still does it.Have ...

...power steering pump but the car is still squealing and when i turn wheel awful please any ideas The belt isn't tensioned correctly. Spay some WD40 on the belt whilst engine is running. May cure ...

...power steering pump pulley wheel binds up when steering is maxed out and makes loud squeling noise do ineed a new pump? and why is it doing it now after i changed the belts , i tried readjusting belt ...

power steering i changed the power steering belt on my 04 elantra. that day i had no problems. the next morning when the engine was cold it had a very loud squeel from start up until i was over 15 mph

...power steering pulley sticks and squeals. belts were recently replaced and are tight..fluid level is normal and there are no visible leaks. dear friend-if you remove the belt and turn the pump and it ...

...power steering belt, the alternator belt and the ac belt and then I went back 3 more times because it kept squealing, all but one time not as bad. The mechanic adjusted the belts and said it was the ...

...power steering pump got replaced. What could be wrong? The pully on the new power stirring pump stops when I turn the wheel. Any thoughts? Thanks, Bernie have you checked the idler arm? make sure the ...