Hyundai Motor 1997 Tiburon "scan gear gives codes 2" Questions

...gear.the more gas you give it the worse jerks. idles fine. changed fuel filter but no different. 2000 tiburon 4 cylinder get a scan tool to retrieve the dtc (diagnostic trouble code). you will get a ...

...2,4 but 1&3 is fine 97 hyundai tiburon Do you have a check engine light? If so,get it checked out. (Free at most major auto parts stores). It sounds like it's in limp home mode. The manufacturers ...

...gear Thursday on my way home the truck was working fine all of a sudden no 2/3 shift just 1 and 2 limped home pulled the pan and the gov. the gov. screen was pluged, also ohmed the gov. and got 2 ...

...gear to give enough revs to pick up speed again. Changing air, fuel filters and Mass air flow meter did not cure, any ideas ? Go and have the computer scanned for codes. Go from there, otherwise you ...

...gear.i disconnected ground from battery,but does not help anything. 2000 ford ranger 3.0 4x4 CEL comes on when 1 or more sensors are "out of normal" range. Autozone or Advanced auto parts will scan ...

...in wear on the timing gears. To repair this you need a class 2 scan tool and The best description of the issue is ...

gear. Not sure what it is. Seems like and few differant things. TCM??? Valve Body??? Tranny Computor??? Yes, Unfortunately transmissions just don't stand up to everyday abuse like they used to. Fluid

gear and delaying when going in reverse Got my tranny over haul and still getting same issues MAZDA yes. fuses all good and forgot to scan the PCM first. you need to scan it. flare is mostly caused by

...gear not shifting up gets locked. Scanner couldn't diagnose when model was entered but the equivalent Mazda 323 throws the codes P0730 and P0328 (knock sensor 1 signal too large). After erasing the ...

...gear and is automatic It sounds like the module is in limp mode. The speed sensor is most likely the cause, but it can be some other things as well. A scan will give a code stating the problem area. ...