1997 Hyundai Elantra "engine mount" Questions

...engine block coolant was drained. (2) After removing the three engine mounting bracket bolts, I also removed the mount bracket from the the body and made enough room to replace the timing belt

belt side engine mounting,lower rear engine mount and front mount and engine can be moved over to leave room to get the plate bolts out that is in front of the timing cover,its awkward but can be done

...engine mount )support the engine with the floor jack before taking loose the engine mount on the fender. Only loosen and take loose the mount from the engine side. This needs to be pulled out of the ...

Engine needs to be replaced When swaping motors on a 2001 hyundai elantra, does the automatic transmission have to be removed with or its mounts loosened The transmission does not need to be removed ...

My 2001 hyundai elantra's engine shakes when I strt it. When put into gear the shaking gets worse. Can you help me? could be that the engine mounts are broken or a missfire

...engein It would be easier to remove both, itll be more work to split it in the car and just pull the engine. Pull the engine and trans as one and then just mount trans to new engine and drop back ...

...engine mount and rear mount which is connected to frame. Engine and mission will be dropped? I want to know how to remove and replace it correctly? I have jack lift Jack stand impact wrench. Anything ...

...mount inside the engine compartment. Do not remove the center nut. Mark the lower strut mounting location on the hub for installation reference. The alignment will be close if the new strut is ...

...while & the gear is on selection(drive) and the vibration increases when I put the A/C on check for a weak or broken engine mount. most likely the one on the right side of the engine has gone

...engine mount?? Or poss exhaust off a rubber, put into reverse with bonnet lifted and get some one to look at the engine whilst u take up drive (handbrake on) see if you can get it to reproduce the ...