1994 Hyundai Excel "not turn" Questions

...not turn from the locked position ? If the answer to these questions is Yes, try turning the steering wheel in the same direction that the front wheels are turned, and try turning the ignition key at ...

...not turn crankshaft or camshaft whn timing beld removed. Remove spark plugs to ease turning engine. Turn engine in normal direction of rotation (unless otherwise stated) Do not turn engine via ...

not turn and in fact is hard to manually turn. The boots around the drive trains left and right are broken and there is a fair degrees of grease and dirt impregnated in the joints. Is this a sign that

...Turn crankshaft two turns clockwise. STEP 6. Ensure timing marks aligned [6] . STEP 7. Apply a load of 2 kg to belt at .Belt should deflect 4-6 mm. If not Adjust position of tensioner pulley. STEP ...

what direction does crankshaft botl turn to remove Righty tighty lefty loosey. Turn to the left to remove and to the right to tighten. It is a normal thread not a left hand thread.

turn signal switch. This is actually called a combination switch. Not had that exact problem with that particular vehicle, have had similar problems with other vehicles. once or twice, loose/worm arm

not turn on when air con is on.when you direct the compressor or brigde the relay,the compressor turns on and the air con works. the air con fan does not work as well. You may have freon in system but

turn the keys. Please help. Possible the Ignition switch is faulty, the IGN fuse is open, the solenoid is struck or the starter motor is struck or not contacting. You will have to check one by one the

...not that, the fuel pump is next. when you turn the key to the on position,do you hear a humming sound for about 10 seconds from under the car? it may take 2 people but try turning the key on for ...

...not turn off engine. Had to force a stall to stop engine running. Accessories still turned on. Had to disconnect battery to stop it going flat overnight. Tried reconnecting battery today, but engine ...