1994 Hyundai Excel "cam sensor" Questions

...lol. It was the crankangle sensor.... thank you all for your help. I had the same problem a few weeks ago, changed the Crank angle sensor & cam angle sensor, fine ever since. change the ...

1995 hyundia excel timing aliment marks I need the timing aliment marks for the cam shaft sprocket if any one has a picture of one that would be helpful my car has had water pump replacement and fuel ...

...not use gas pedal when try tto start. Remove your air filter remporarily and try it. check the crank position sensor and cam position sensor, over time the contacts tend to get brittle and break ...

...I HAVE A HYUNDAI EXCEL 1991 AND ITS NOT COMING POWER TO THE INJECTORS,HOW I FIX MY ECU,DO YOU HAVE DIAGRAM? check crank&cam sensor no signal no power to injectors. if ecu must replace-not ...

the clutch slave cylinder and is held in place by a 10mm headed bolt or phillips head (posi drive) bolt. Good place to start. franknpeg May be crank angle sensor or cam angle sensor, or even fuel pump

...with a capable scan tool and then go from there..... sounds like an engine rebuild if the smoke a blueish colour. Try replacing the cam angle sensor aswell. if the smoke is not blue treat your

cam Try replacing the crank angle sensor i had a problem where my automatic 2000 accent x3 would stall when it warmed up and wouldn't start till it was cold again. its a common problem on x3's

...cam shaft sensor replaced and a few other things changed but it is still giving me trouble. im no mechanic but i think the car may be flooding but my hyundai mechanic begs to differ. The diagnostic ...

...thought that was the problem. Ran great for 3 days and then started stalling again. It is a GX Twin Cam Hyundai Excel. Any suggestions? new sensors or reconditioned ones from a scrapyard,best bet is ...

...sensor..cam sensor..air cleaner..emptied the cat converter..rear muffler..ecu..tps switch..airbox switch..cleaned the injectors..oxy sensor..alt..eng fan..fuel pressure reg..even a bunch of switches ...