Question about Hyundai Santa Fe
new power steering pump put in, lines bleed, and still having whinning noise. Is there another part with the power steering pump we can check? any suggestions to why a new power pump is still whinning
...new power steering reservoir. They don't run to much and they are easy enough to install. You can't let it run out or you will most likely do damage to the pump, then you'd be looking at ...
...NEW POWER STEERING PUMP YOU NEED TO BUY NEW POWER.STEERING HOSES O RINGS TO GO ON NEW POWER STEERING PUMP.HOSES THE OLD ORINGS WILL LEAK. THEN TAKE NEW POWER STEERING PUMP ON INSTALL IN VECHICLE THEN ...
...NEW POWER STEERING PUMP DONT HAVE DRIVE PULLEY ON IT SO TAKE TO A MACHINE SHOP THE WILL REMOVE PULLEY FROM OLD PUMP AND PRESS ON THE PULLEY TO NEW POWER STEERING PUMP.BESURE TO BUY NEW O RINGS TO END ...
...power steering fluid reservoir in the engine compartment. If it is low or empty you have a leak in the system. You can refill the system with new fluid but it will continue to leak until the leak is ...
...power steering lines ( and can normally be resolved with new lines or sometimes you may be able to bypass and clamp the leak on the line) 3- you may have busted the O rings in your powersteering pump ...
Question about Hyundai Santa Fe
...power steering at all. their not the garage that failed miserably but they don't know what problem is. suggesting new rack again. had used stop leak before line fix. Any ideas? is their pressure ...
Question about Cars & Trucks
Power steering 2000 f150 New pump still have hard steering after bleeding Then the issue lies with the steering box. Did you hock the lines correctly back words I know its 50/50 but that would do it .
Question about Hyundai Santa Fe
install a new pump and see what happens. The other option would be the rack and pinion (steering gear). The power steering pump is the cheaper of the two and usually the problem. I hope this helps you
Question about Hyundai Santa Fe
...power steering pump however will leak. If there is a leak near the pulley than I would suspect the pump is the source of the leak. Try lucas p/s leak stop if that dont work you'll be needind a new ...
730 questions posted
Usually answered in minutes!
1,503 Questions
1,043 Questions
1,001 Questions
881 Questions
417 Questions