Fan switch only works on speed 4 and not on 1,2, or 3. How do I replace the fan switch? first find the blower resistor and check the voltage there its near the blower motor, look for a 5 wire harness
...blower motor fan (also called the squirrel cage) Sometimes mice bring things into this for a nest. may have leafs in it, or blower motor bearings are bad,replace blower motor to rid niose. good
...blower motor. Lower voltage = lower fan speed. If there is w12 volts on the orange wire check voltage on the black wire. You should see 0. If you see more than 0 than you have extra resistance in the ...
...fan isn't running Can be a blown fuse, defective blower motor, or defective Blower Motor Resistor Pack. Rarely is the speed control bad but it is possible. Check the fuse and if it is good apply 12 ...
...fan speed there is nothing... worried about the windshield now...weather is changing here in Chicago and I will need the window clear of frost and moisture.... I would say either the blower motor is ...
...blower fan only works on level 4 setting so i unpluged 4 terminal plug at resistor block and found battery voltage only at yellow wire also level 4 blows slowly is this switch or supply voltage fault ...
...fan inside blower motor housing. Right behind the glove box theres a constant nocking noise when key is on or car is running it is coming from under the cabin filter what could it be Not sure ...
fan, which is the "air blower" for heat and A/C sits on its end in the heater box which is just above your front passenger's feet. It could be bad if it is not running when you turn on the fan switch.
...remove/replace heater blower motor I think I have a leaf stuck and it "ticks" when the fan is turning, was looking here to see how easy/hard it is to R&R the fan to clean out.. looks pretty
827 questions posted
Usually answered in minutes!
676 Questions
581 Questions
394 Questions
148 Questions
73 Questions