2001 Saturn SL "diagram showing tension pulley" Questions

...bolt of the tensioner pulley and turn clockwise to release the tension and reapply the belt to the upper pulley and on top of the tensioner or replace the belt, according to the belt routing

...diagram, also showing how to release tension to remove and replace the belt. further if you note the inside of the belt is ribbed, thus the belt goes around those pulleys which are ribbed, and the ...

...pulley down and loosen the belt, Slide the belt off one of the other pulleys. When it's clear, release the tensioner, remove the belt. Same deal in reverse to replace the belt. Here's a diagram Hope ...

...diagram in the engine compartment describing the route it takes around the various pulleys. One side of the belt is grooved, the other smooth. The pulleys are also either grooved or smooth.You can ...

Showing. Remove this Bolt and the whole Tensioner Assembly will com off. When replacing the Tensioner Assembly - MAKE SURE you place the protruding "nipple" on the underside base of the Tesnioner into

diagram + tensioner pulley I want to replace my serpentine belt and tensioner pulley on Nissan 2006 frontier 4 cylinder and need a belt diagram that shows where the tensioner pulley is. They are under

...Showing. Remove this Bolt and the whole Tensioner Assembly will come off. (3.) Some Tensioner Assembly's need you to locate and remove mounting bolts. If Applicable: When replacing the Tensioner ...

...a diagram on the fan shroud showing how it goes. The idler pulley keep tension on it. Basically the grooved side of the belt goes on the grooved pulleys and the smooth side goes on the smooth

...pulley on the diagram. Continue to route and then check the diagram until you have the belt wound around every pulley except the belt tensioner pulley. 6 Double check to make sure the belt routes ...

...diagram it will show a tensioner pulley and idler pulley and the approximate location. Most Fords use a 15mm or 16mm bolt on the tensioner, this is where you put a wrench to rotate the tensioner and ...