2001 Saturn SL "1 serpentine belt" Questions

...Serpentine Belt with an Automatic Tensioner: 1. Find the Tensioner(s). (See Diagrams on Link) 2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE ...

...Serpentine Belt: 1. Find the Tensioner(s). (See Diagrams on Link) 2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT OR OPENING (3/8ths ...

...serpentine belt on my 2002 SC-1 Saturn without doing this, but you have to be very patient because there is only about 2 inches of clearance to work. A long handled box wrench works for me on the ...

...serpentine belts are adjusted automatically by a springloaded belt tensioner idler pulley, check to see if you idler is bad before you attempt any type of adjustments... most require a 1/2 " breaker ...

...serpentine belt on I installed a brand new tension pulley, loosened the tension, but still can't quite slip the belt on. I was very frustrated, to say the least. Try using a 1/2 inch socket on your ...

...Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the ...

...serpentine belt over the last few days and none of those have fixed the problem With the ignition switch in the off position, check each curcuit by pulling out each fuse 1 by 1. Use a digital multi ...

...1)Remove serpentine belt from above with 14 mm wrench on spring loaded idler pulley. 2)Disconnected battery 3)jack up car and remove passenger front wheel 4)it helps to also remove the wheel well ...

...serpentine belt, then remove it from the top of the engine compartment Fig. Fig. 3: After removing the front wheel, remove the inner fender splash shield Fig. Fig. 4: View of the alternator location ...

...1/2" from the plug while they crank it. See if you have spark, careful not to touch the body. you will get shocked if the coils are good. It there is spark then spray some starting fluid into the ...