car hit curb , changed the lower control arm, sway bar, cv joint, k frame , strut and the wheel isstill not straight ..... ? what else ? Knuckle and/or inner or outer tie rod? And then an alignment.
...control arm bushing on 1994 dodge intrepid Here are the instruction on how to replace your control arm bushing. please not that there is a special tool needed that you will need to get from you auto ...
...control arm off my 01 stratus SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS. MAKE VECHICLE SITTING ON LEVEL SOLID GROUND. REMOVE FRONT WHEELS , REMOVE HEAT SHIELD, IF EQUIPPED WITH 15 INCH WHEELS, ...
...control arm. If you had the rear trailing arm fixed because of recall then 2 months later they say the control arm came loose and broke the ABS sensor. Is there a connection between the rear trailing ...
...control arm how do i fix?already bought new control arm. Jack the car up and remove the tire. Use a ball joint separator on the front lower control arm and remove the remaining 2 bolts, if working on ...
...control arm on 1996 Honda Civic DX ? How do you changr the upper control arm/ball joint on a 1996 Honda Civic DX ? UPPER CONTROL ARM: Do not disassemble the upper arm. If the ball joint or bushings ...
Question about Cars & Trucks
...control arm from the spindle to replace the joint. First of all . Make sure that the control arm bushings are good on the control arm. If they have any deterioration or cracking, it would be advised ...
Question about Cars & Trucks
control arm bushes nissan navara d22 duel cab 4wd 1997 , do u need to drop torsion bar and if so what's the best way to do this to remove lower control arm bushings you need to remove control arm from
...control arm and ball joing is one unit. To replace the lower control are you need to unbolt it from the subframe, airmatic strut, sway bar link and from the lower ball joint. The lower ball joint is ...
control arm and wack the end on it till the ball joint separates from the control arm. using a pry bar put it thru the control arm so you can pry down on the control arm to release the ball joint then
55 questions posted
Usually answered in minutes!
