Question about Saturn SL2
drain plug from 1996 Saturn SL2 radiator; does this unscrew and screw back in? Do I need special tool? seems to leak from this position;I've had the mechanic tighten the plug. still leaks,I've tighten
radiator has two large rubber hoses connecting it to the engine. where the top large hose connects to the engine is the thermostat housing. so you have to drain the cooling system, take off that hose,
...it is not working anyway drain the radiator, leave the bottom hose off tip the top hose up and pour water in very rapidly. i think you are going to find that there is a major blockage in the
...radiator on a 2000 saturn SL2? First drain the coolant, then move the intake out of the way , there are three screws hold it down.After that there is a hose that was kind of under the intake you need ...
...take the hoses off and put on the new ones. tighten the hoses and your hose leak problem is fixed. if there is an coolant left in the system, drain it out the petcock on the bottom of the
...radiator drain plug and install the cylinder block drain plug. Tighten the block plug to 26 ft. lbs. (35 Nm). Connect the negative battery cable and properly fill the engine cooling system. Operate ...
...drain the coolant out at the low point on the radiator, that way it is saved if new. then you take off the right front wheel and remove the plastic access cover from behind the wheel to get to that ...
...drain plug on the bottom of the radiator either on the passenger side or drivers side of the radiator which should be a plastic wing nut that unscrews to let out the coolant or you at this point can ...
where is the radiator drain plug It should be on the left of the radiator at the very bottom of the radiator.It looks like a plastic petcock valve.
676 questions posted
Usually answered in minutes!
145 Questions
35 Questions