1993 Saturn SL2 "check temperature gauge sensor 1996" Questions

Check you Coolant Level, and see if the Water Pump is Pumping Water through the Radiator. Please Rate my Response, I need all the Help that I can Get! Thanks! What year is your car? If the temperature

...Check level in rad & fill to an inch or so from top of rad. Start car & turn heater on.(not defrost) Now let it run until engine gets up to normal operating temperature & let it run until ...

...temperature sensor provides a signal to the PCM to tell it when to turn the fans on and if its a three wire coolant sensor it also feeds the signal to the gauge on your dash and if the gauge on your ...

...check first make sure your coolant is full. if it is then you could have temperature switch or sensor bad,not the temperature sensor for the motor though(not the one for your temperature gauge in ...

heater in 96 windster blows cold air first check coolant level if its full then you could have a temperature sensor or switch bad. not the temperature gauge sensor though.

...The temperature sensor is for the gauge on the dash and is monitored by the powertrain control module. If there was a problem with this sensor the check engine light would be on. Hope this

...temperature sending unit/sensor several things could be wrong, 1st check the coolant level, the Radiator core could have some type of restriction, should be flushed, faulty thermostat, electric fans ...

...check the ECT, Engine Coolant Temperature Sensor. It is on the engine and sends a signal to the PCM, Engine Computer. ----------------------------------------------------------------- Section 03-03: ...

...temperature gauge runs off of the single or double wire sensor that comes off of the head, the computer uses the sensor by the thermostat. If the computer is reading -40, it's not getting a signal ...

...temperature cold, this causes the fuel injection to supply a lean mixture with the resulting hard start, to check this you need a shop to read the ECT with a special live data scan tool to determine ...