yah i just replaced the battery and now my blinkers don't work You might want to check the turn signal fuse on the interior fuse panel and check the blinker relay in the fuse panel under the hood.
Question about Chrysler Cars & Trucks
...turn signal relay with another relay in the fuse box to see if that resolves the issue. If swapping the relay doesn't work, you may need to replace it. If you're not comfortable working with ...
...replace the bulb and retest the turn signals. When a bulb goes bad on this circuit, the resulting operation can mimic a bad flasher or one that is failing. Locate the combination turn signal flasher ...
Question about Cars & Trucks
...turn signal switch, checked the fuse, and tested the hazard flasher, the next step would be to check the turn signal relay. The turn signal relay on your 2004 Chevy Classic is located in the ...
...replace the relay, looking in the usual places (under the hood, under the driver side dash) but there is nothing there. I listen for the sound and the sound comes out of the speakers. Can anyone tell ...
...turn signal is hesitant to flash, but still does. How can I fix this? Most likely cause is the flasher relay located under the drivers dash in the fuse panel. This relay is round and may be metal. ...
...REPLACE MY TURN SIGNAL LIGHTS ON 2003 HYUNDAI TIBURON PROCEDURE FOR REPLACING MY TURN SIGNAL LIGHTS AND TURN SIGNAL LIGHT RELAY. GIVE ME ALSO THE LOCATION OF THESE ITEMS. I just found out today that ...
...turn signal relay. Start with checking the relay. A lot of times you can replace it with one of the other relays in your car for a quick check. If they work after you try this. Replace the relay. If ...
Question about Cars & Trucks
...Replace Turn Signal Cruise Control Wiper Switch Silverado Sierra 99-02 ... 1997 Chevy s 10 Turn Signal Relay - YouTube ? 0:45 https://www.youtube.com/watch?v=epqk6MCswY4 Aug 23, 2009 - Uploaded by ...
...body grounding points and make sure you have a full 12v supply to the relay.If you have low voltage to the relay check the fuse and clean off any corrosion,if not that replace the turn signal
307 questions posted
Usually answered in minutes!
102 Questions
64 Questions
