1993 Saturn SL1 "cam timing" Questions

...the SOHC & DOHC Trans Look The Same But they are geared different.If you put a twin cam trans into a single cam car or visversa it will not shift into 2nd 3rd or 4th.MP6 For SOHC MP7 ...

KNOW FUEL IS THE PROBLEM. IN WHICH CASE IT COULD BE A CLOGGED FUEL FILTER OR A INOPERTIVE FUEL PUMP. iF IT HAS FUEL AND SPARK LOOK FOR A BROKEN OR STRIPPED CAM TIMING BELT. NOT TURNING THE CAM OR CAMS

hundred bucks. The oil pump is also then accessible, maybe want to do that as well. This is much more involved than replacing the spark plugs, the timing of the cam and crank shafts must be kept right

...jmped or broke and broke the guides,if thats the car you most likely bent the valves in the head,,,i would remove the cam cover and the timing chain cover and see what you got,you may need a ...

...cam when I start the car it idles extremely high I have changed the air idle control valve and spark plugs and wires could someone tell me what could be the problem It could be a vacuum leak or the ...

Cam position sensor codes seem to indicate a engine timing (not spark, but crankshaft/camshaft sync). Old timing belts or worn tensioners can cause belts to jump a tooth or two which can have a pretty

...cam sensor? adjust the timing belt Hi... You DID almost everything to try fix your car. If you have GOOD spark,good spark plugs. Check the SIGNAL to the INJECTOR, #1 you said is missfiring. you can ...

I have a 1992 saturn sl1 twin cam with 140,000 miles. The transmission has been a little jumpy recently and a few times it would randomly get stuck in first gear while i was driving. i would turn my ...

...A worn or cracked seal can let oil run into the wrong place.  Depending on how the camshaft and valve lifters are fitted, the valve stem is at the bottom of the camshaft and ...

...Cam Timing Mark to mark on #1 Exhaust cam cover, then take up slack between Exhaust & Intake Cams (on top between the cams), Then align the Intake Cam to mark on #1 Cam Cap, "Now" loosen the 17mm ...