up and down air ride suspension not working I would just convert it to a non air ride system uunless you tow heavy loads
...a message came on saying that the air suspension is inactive. Help what is it??? Hi, Probably the ride height sensor has failed or come unplugged, Crawl under the right side and check it is still ...
...and enthusiasts sites where you can get this info. Certainly UK based. you could be right or the ride height valves not resetting when back on the ground if resetting brings it back to ride height
...does it sometimes when i just turned ignition on.any ideas there is a sensor that feeds back the ride height to the control module, it may be
Question about Land Rover Range Rover
be the height sensors, they can tell the system to over inflate and therefore lead to a very bouncy ride
We have a 1996 range rover with hydraulic suspension. The suspension has 'crashed', and it's riding on the bumper. Just wondering if the problem is fixable, or do we need to fork out for a new ...
...can be changed to conventional coils, eliminating the EAS completely. You will not get as good a ride, but you will not have problems with the pump, valve block, lines or air springs either. If
...not to replace those airbags with the springs. It's easy to do, takes just a few hours, the ride is more firm, my rover handles even better, and you never have to worry about getting stranded ...
...bags Is it bouncing, or is it adjusting itself up& down? If it is adjusting itself, you have a bad ride height sensor. If it is just bouncing a bit, this can be due to bad shocks and/or airbags. Or ...
...would go up. And I was able to drive it without any problems. the other day I wanted to go for a ride, I started it up and waited.... only this time it never did go up. I listened for the pump to ...
247 questions posted
Usually answered in minutes!
340 Questions
202 Questions
166 Questions
146 Questions
112 Questions